12/29/2023 0 Comments 2011 hoyt carbon element for saleIf impacted, inspect the area for visible broken fibers, multitude of separation cracks, cracking that appears to resemble a spider-web, dented surface, or a soft flexible surface at the impact point. In the event that your bow does encounter a surface impact, you must carefully inspect the riser for damage. However, in general, composite structures do not with- stand high load impact such as being dropped from a tree, or by having some other object impact the structure. Hoyt Carbon Risers are designed to withstand high stress flexing and high stress loading that would be asso- ciated with normal use and function of the bow. If the bow has no structural failure, the bow will be returned and can resume normal use.Ģ) Extreme care should be taken to avoid impact damage to a Hoyt Carbon Riser. If the bow is found to have a structural failure, the riser will be repaired or replaced under the normal condi- tions of Hoyt’s Limited Lifetime Warranty. (See war- ranty information for instructions on returning product to Hoyt). These are typically not fractures or breaks in the carbon fibers them- selves and do not represent a structural failure.įor separations that are larger than 1/8 inch in length and/or wider than 1/32 inch wide, the bow should be returned to Hoyt for inspection and testing. These small separations are considered normal and non-structural provided that they are under 1/8 inch in length and less than 1/32 inch wide at its widest location. This is a typical composite condition which may become more visible as the bow is used over time. HOYT CARBON RISER SPECIAL PRECAUTIONS AND INFORMATION:ġ) Composite constructed components, such as Hoyt Carbon Risers, may show small surface separations in the paint and/or top surface layer of the construction. I wish Hoyt would make an aluminum version of the carbon risers though, they are just flat out cool looking. I just felt there was less to worry about with the aluminum riser. All the disclaimers and warnings damaged my calm about the carbon bows. At least part of the reason is this following section from the Hoyt owner's manual. The draw is smooth, shock and vibration levels are minimal, handling is easy thanks to the low mass weight and the balance at full draw is absolutely rock solid.I went with the Spyder Turbo. Hoyt's 2011 Carbon Element is a fun bow to shoot, which to me is more important than many other factors that go into purchasing a bow. Limbs are available in 40-, 50-, 60-, 65-, 70- and 80-pound peak draw weight options, each with 10 pounds of downward adjustability. Limb durability is a top priority for Hoyt, as demonstrated by its in-house testing - limb designs are made to withstand 1,000 dry fires at 80 pounds with a 30-inch draw length. The use of spaced split limbs eliminates problem areas common in the traditional solid limb and increases the overall effective width, which adds stability. The four individual pieces that make up the split limb sets are matched through deflection value measurements, guaranteeing consistency for each bow. Limbs are made with a 5-Layer lamination process and pressed into their final form. The stabilizer-mounting fixture can be clamped on either side of the riser, allowing the bow's balance point to be fine-tuned.Ĭarbon Element XTS PRO ARC limbs are designed for high energy storage and positioned to reduce vibration and noise. For instance, instead of mounting your sight directly to the riser, you will mount it to drilled and tapped holes in a plate that is clamped onto the riser. Hoyt has overcome this obstacle by attaching fixtures and plates through a clamping function. The physical properties of carbon do not allow for direct attachment of most accessories. Hoyt's popular TEC design long ago earned a reputation for strength, and now that it has been coupled with the hollow carbon tube construction, strength and durability have been taken to new levels at a mass weight of only 3.6 pounds. While some aspects of the TEC platform are easily recognizable, such as the rear-facing strut, the flowing carbon tubes give the new rig a distinct look. Proprietary O-Tech Technology is used to create, shape, twist and form the hollow carbon tubes into the proven TEC riser design. Hoyt brings back its ultra-strong carbon TEC riser to serve as the cornerstone of the Carbon Element's structure.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |